Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2014
    Posts
    2

    Default Copy Problem with version 3.3.8 and QNAP

    Hello.
    I have a problem with BCompare version 3.3.8.16340. I will synchronize Data from two locations: a mobile USB-Disk and a QNAP NAS Server TS-412. So I display the differences and will copy a large TIF file (12 MByte) from USB Disk to NAS-Server. I use the right mouse menu copy to left and copy process starts. But after 2 MByte the process ends with an error:
    German version "Der angegebene Netzwerkname ist nicht mehr verfŘgbar."
    Translate to English: "The given network name is not available".
    But when I go to windows explorer the NAS Server works fine. I had this problem also with previous BCompare versions. I don't know, if this problems occur with other disks or other file sizes. But I know, that I have a seriously problem with with 12 MBytes and the QNAP as Target.

  2. #2
    Join Date
    Oct 2007
    Location
    Madison, WI
    Posts
    11,788

    Default

    Hello,

    If you copy from your USB to your Desktop\, then from your Desktop\ to the NAS device, at which point do you hit an error?

    Are there any available updates to the firmware or drivers for your NAS device?
    Aaron P Scooter Software

  3. #3
    Join Date
    Feb 2014
    Posts
    2

    Default

    Hello,

    Thank you for answer.

    I copy directly from USB disk to NAS. The disk in desktop is not involved. I use the windows explorer to map the devices. I map USB disk to F: and the QNAP to Q:. Then I use BCompare to find the differences. Then I copy from F: to Q: using BCompare.

    I've checked the firmware versions. Yes, there is a firmware available.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •